Clips to brass, reeds, piano, acoustic bass, snare and toms
Crisp, clear, well-balanced response, even at high SPLs
Interchangeable elements available for cardioid, subcardioid and omni polar patterns
UniMount® clip permits accurate positioning while protecting element
Operates on battery or phantom power
25' (7.6 m) cable permanently attached to mic, TA3F connector at power module
Also available as:
ATM35cW -- less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems

ATM35 Specifications
Element Phantom Power Requirements
Condenser
11 - 52V, 2 mA typical

Polar Pattern Battery Type
Cardioid
9V

Frequency Response Battery Current/Life
30 - 20,000 Hz
1 mA/1000 hours typical

Open Circuit Sensitivity Switch
-45 dB (5.6 mV) re 1V at 1 Pa
Off/on-flat/on-roll-off

Impedance Low Frequency Roll-off
200 ohms
150 Hz, 12 dB per octave

Maximum Input Sound Level Weight
145 dB SPL, 1 kHz at 1% T.H.D.
0.3 oz (8.5 g)

Signal to Noise Ratio Power Module
67 dB, 1 kHz at 1 Pa
In-line

Dynamic Range (Typical) Output Connector
118 dB, 1 kHz at Max. SPL
XLRM-type on power module

Accessories Furnished:
AT8418 UniMount® instrument mount; AT8532 power module; protective pouch